Programmable Temperature Switch & Transmitter - Threaded Thermowell Design
Temperature / Transmitters / PTS02

Programmable Temperature Switch & Transmitter - Threaded Thermowell Design Picture
  • CSA Class I Div. 1 Explosion Proof
  • Available 4-20 mA or voltage programmable signal output
  • Available fully programmable switch output; relay or transistor
  • Field re-programmable with optional PC interface module & software
  • Security password and tracking protection for re-programming and re-calibration
  • Utilizes self-calibration feature for accurate and stable performance
  • Utilizes Pt-100 Ohm RTD Class A element for temperature sensing
  • Excellent long term properties
  • Standard SS316/SS316L construction
  • Type 4X, IP66/IP67 rated environmental protection
  • Easy installation with various mounting configurations

Series PTS02 is a Programmable Temperature Switch & Transmitter offering an analog 4-20 mA output, transistor or relay switch output, and an optional RTD output. Utilizing Intempco’s patented MIST technology, PTS02 is designed for optimum accuracy and performance. The main areas of applications for this transducer are oil and gas as well as other hazardous areas.

PTS02 is shipped factory calibrated to customer specified temperature ranges. But the unique feature of the PTS02 is that it is re-programmable. Process temperature or alarm change? No problem! Simply use PTS02-PKIT interface module and re-range your PTS without the need to recalibrate and without the loss of accuracy. PTS02 is much more accurate than an RTD and a separate indicator / transmitter or switch. When the PTS02 is re-scaled to a different temperature range, the calibrated default values are not lost. This transducer can be re-calibrated by performing one-point or two-point calibration using known temperature standards. This is where the PTS02 leaves the competition behind. Indicating temperature range, current output, switch set point, switching hysterises, switch logic, damping and other features are all programmable.

The PTS02 wetted parts, as well as the housing, are fabricated from 316 stainless construction. Other materials, various probe diameters, fitting sizes and thermowell types are available. For electrical connection, a 1/2” NPT conduit with lead wires is standard. The sensing element used is Pt-100 Ohm RTD Class A. PTS02 can be made available with an additional 3-wire RTD output. This feature allows a single process connection to be used for indication of temperature and for remote indication, recording, or controlling. Each PTS02 has the part number, range and serial number marked on the transmitter housing.

If you require an accurate, stable and dependable temperature transducer, look no further. Model PTS02 is your solution.

This product is protected under US patent 7,223,014 and CDN patent 2,561,570.

  • Oil and Gas
  • Refineries
  • Chemical and Petrochemical Plants
  • Paper Mills
  • Hydraulics
  • Mining

  • Model Number

  • 1
    Temperature Range

  • 2
    Output

  • 3
    Probe Diameter / Shank

  • 4
    Probe / Fitting Material

  • 5
    Immersion Length 'U'
      From 1 to 24 inches
  • 6
    Lag Extension Length 'T'
      From 0 to 6 inches
  • 7
    Instrument Connection

  • 8
    Process Fitting Type 'P'

  • 9
    Extension Cable Type

  • 10
    Extension Cable Length 'F'
      From 6 to 1200 inches
  • 11
    Approvals

  • 12
    Option 1

  • 13
    Option 2


  • Comments / Specifications

X

Please select your region and language

(to make your selection, click on a regional language)

Canada
USA
X

Request Membership

Are you a customer or a distributor?

Customer
Distributor