Miniature Capacitance Level Transmitter 4-20mA, Loop Powered
Temperature / Sensors with M12 Connectors / LTX60

Miniature Capacitance Level Transmitter 4-20mA, Loop Powered Picture
  • Continuous loop-powered 4-20mA operation
  • Remote DIN Rail mounted transmitter, up to 1000ft away
  • Hermetically sealed, vibration resistant construction
  • 1/2” NPT thread standard
  • Internal probe PFA clad or Stainless 316 bare
  • Cable extension or Brad Harrison connector
  • Accuracy 1% of span for same dielectric

The Intempco model LTX60 capacitance level transmitters are one of the most compact and vibration resistant made available to the industry. They feature one-piece tubular design, welded 3/4" NPT fitting and a concentric internal stainless or PFA clad probe. Remote electronics are potted into the tube portion above the fitting. DIN Rail mounted transmitter can be installed up to a 1000 feet away from the process where calibration can be performed. The microprocessor-based electronics convert frequency change, detected by the probe, into a linear, highly accurate 4-20mA signal. This compact design makes installation and setup a simple task. The advanced signal conditioning circuitry greatly minimizes the adverse affects of poor dialectric and material coating on the probe.

LTX60 RF transmitters can be used in metallic and non-metallic tanks, stationary or mobile equipment. Ideal for small tanks of all types, they can be used in virtually any liquid, conductive or non-conductive. One ideal application is measurement of fuel and oil level of tanks in mobile equipment. Compact, rugged and hermetically sealed construction of LTX60 series sensors cannot be beat in performance.

  • Diesel fuels, other fuels and oils in metallic or non-metallic tanks
  • Water based liquids in metallic or non-metallic tanks
  • Acids compatible with Stainless 316 and PFA Teflon in metallic or non-metallic tanks
  • MEK and other solvents
  • Chemical holding tanks, metallic or non-metallic
  • Measurement of liquid levels in mobile equipment
  • On-site calibration may be required
  • Not recommended where material dielectric varies due to change of temperature or pressure
Miniature Capacitance Level Transmitter 4-20mA, Loop Powered Details

  • Model Number

  • 1
    Output

  • 2
    Extension Type

  • 3
    Extension Cable 'E'
    : Please select an extension
  • 3
    Extension Cable 'E'

  • 3
    Extension Cable 'E'
      From 6 to 999 feet
  • 4
    Fitting Type

  • 5
    Probe Material

  • 6
    Probe Length 'L'
      From 2 to 36 inches
  • 7
    Options


  • Comments / Specifications

X

Please select your region and language

(to make your selection, click on a regional language)

Canada
USA
X

Request Membership

Are you a customer or a distributor?

Customer
Distributor