Sonde de température sanitaire avec sortie 4-20mA
Température / DTG / DTG12

Sonde de température sanitaire avec sortie 4-20mA Picture
  • Large 4-digit red LED display
  • Field re-programmable with optional PC interface module and software
  • Security temper protection for re-programming
  • Optional 4-20mA programmable linearized signal output
  • Optional fully programmable switch output, relay or transistor
  • Utilizes self-calibration feature for accurate and stable performance
  • Utilizes Pt-100 Ohm RTD Class A element for temperature sensing
  • Micro M12 male plug or cable gland for electrical connection
  • IP 65/NEMA 4 rated environmental protection
  • All stainless steel 316 construction
  • Easy installation with various mounting configurations

The Model DTG12, Digital Temperature Gauge, is a complete solution for most industrial temperature monitoring and temperature indicating applications. This gage features a bright and large 4-digit red LED display, optional analog 4-20mA output, optional switch output, and an optional RTD output. Utilizing Intempco’s patented MIST technology and the self-calibration feature, DTG is designed for optimum accuracy and performance. The DTG is designed as a direct replacement for bi-metal, liquid bulb and glass thermometers. Digital Display indicator can be flange ,bezel, or bracket mount.

DTG can be factory calibrated to customer specified temperature range, in units of Celsius or Fahrenheit. But the unique feature of the DTG is that it is field programmable. Use DTG-PKIT interface module and re-range your DTG without the need to recalibrate and without the loss of accuracy. DTG is much more accurate than an RTD and a separate indicator / transmitter. When the DTG is re-scaled to a different temperature range, the calibrated default values are not lost. This gauge can be customer re-calibrated by performing one-point or two-point calibration using known temperature standards. Indicating temperature range, current output, switch set point, switching hysterises, switch logic, damping and other features all programmable.

The DTG wetted parts, as well as the housing, are fabricated from 316 SS. The probe is either of 1/4 ” or 3/8 ” diameter as standard. M12 male plug or cable are available. The sensing element used is Pt-100 Ohm RTD accuracy to DIN EN 60751 Class A and the DTG can be made available with an additional 3-wire RTD output. This feature allows a single process connection to be used for indication of temperature and for remote indication, recording, or controlling.

  • Replacement for Bi-Metal, Liquid Buld and Glass Thermometers
  • Pharmaceutical
  • Food preparation
  • Utilities and Municipal
  • Refineries
  • Chemical and Petrochemical Plants
  • Paper Mills
  • Hydraulics
Sonde de température sanitaire avec sortie 4-20mA Details

  • Model Number

  • 1
    Model Range

  • 2
    Output

  • 3
    Probe Diameter 'D'

  • 4
    Probe Material
    S : Stainless steel 316/316L
  • 5
    Immersion Length 'U'
      From 1 to 999 inches
  • 6
    Remote Probe Cable Length 'E' (Teflon w/SS armor)
      From 0 to 999 inches
  • 7
    Fixed Code
    0 : Fixed Code
  • 8
    Process Fitting Type / Size

  • 9
    Extension - Connector / Cable Type

  • 10
    Extension Cable 'F' or 'H'
    : Please select an extension
  • 10
    Extension Cable 'F' or 'H'

  • 10
    Extension Cable 'F' or 'H'
      From 12 to 999 inches
  • 11
    Surface Finish
    SF : 32 u-inch (0.8 um) Ra max. or better
  • 12
    Mounting Options


  • Comments / Specifications

X

Please select your region and language

(to make your selection, click on a regional language)

Canada
USA
X

Request Membership

Are you a customer or a distributor?

Customer
Distributor