Capacitance Level Transmitter for Steam Boiler Applications
Niveau / Capacitance Transmitters / LTX22

Capacitance Level Transmitter for Steam Boiler Applications Picture
  • High pressure/temperature design for steam boilers
  • Transmitter housed in rugged aluminum head or remotely
  • Continuous loop powered 4-20mA operation
  • Microprocessor Based
  • Accuracy 1% of span for constant dielectric of material
  • Non-interactive zero and span calibration
  • Calibration accomplished with 4 push buttons
  • High pressure 1/2" & 3/4" fittings available
  • Ceramic clad inner stainless probe design

The Intempco LTX22 is a capacitance level sensor designed for modulating level control of liquids in metallic tanks. The probe is normally installed in a steam boiler, or metal tank where it is grounded through the process connection, the boiler tank forming the reference ground. It can be used in a non conductive tank if a grounding rod is provided.

The probe measures level by measuring the change in electrical capacitance as level changes in the tank. The micro-processor based electronics convert this capacitance change into a linear, highly accurate output signal. This signal may be used with one or more electronic modules to provide level control, level alarms, and/or outputs to a building management system.

The LTX22 is available with an enclosure and installed electronics or an enclosure and remotely installed electronics in a NEMA 4 box. The connection is made via coax cable. Remote electronics are a preferred choice for higher ambient temperature applications.

  • High pressure/temperature steam boilers
  • For level control in building management
  • Water and water-based liquids.
  • On-site calibration required
  • Not recommended where material dielectric changes
  • Tank must be conducive or grounding may be required or see other Intempco level probes.
  • Do not use in high vibration/shock applications
  • Read "Safety Information" carefully in LTX22 instruction manual as operation in steam boilers is a very serious matter
Capacitance Level Transmitter for Steam Boiler Applications Details

  • Model Number

  • 1
    Electronic Module

  • 2

  • 3
    Certificate of Compliance

  • 4
    Process Connection

  • 5
    Process Connection Material

  • 6
    Probe Type

  • 7
    Probe Length 'L'
      From 6 to 240 inches

  • Comments / Specifications


Please select your region and language

(to make your selection, click on a regional language)


Request Membership

Are you a customer or a distributor?